Fixed Colors:
● White
● Green
● Orange
● Red
● Blue
● Cyan
● How do I know if the firmware update for my Litra Beam LX is in progress or
complete
When a firmware update is in process, the RGB light blinks quickly. The light returns to the
original light state once complete.
Please use USB cable connection to update the firmware (Bluetooth connection is not
supported for firmware updating).
● Can I turn just one side of the Litra Beam LX light on or off?
There are two ways to switch one side of the lights on or off:
● Slide control switch to light of choice, and single tap on power button (The image
shows the location of the slide control switch).
● Use G HUB (shown below) to turn off or on, regardless of where the control switch is
located at time you power off.
To Next Page
Loading...