● What does the control switch do on my Litra Beam LX?
The control switch gives you independent control of each light.
● When you slide the control switch to RGB, "+" or "-" adjusts the brightness of RGB.
● When you slide the switch to point to WW light, "+" or "-" adjusts its brightness.
● Do I need software to adjust the light settings on my Litra Beam LX?
The light settings can be adjusted manually without a software. The hardware controls are
placed on the top of the light so it leaves all of the front and back face of the object for light
diffusion. The hardware buttons are:
1. Bluetooth pairing button.
2. A set of + and - buttons to control color temperature when in WW mode (Warm White
/ Cool White), and color choice when in Red Green Blue (RGB) mode.
3. A set of + and - buttons to control light brightness.
4. A control switch that slides towards the WW or RGB light in order to control it.
5. Power button.
To Next Page
Loading...