iOS / iPadOS
1. Open Settings and click Bluetooth.
2. Tap on the Logitech device you want to connect to from the Other Devices list.
3. The Logitech device will be listed under My Devices when paired successfully.
Upon pairing, the LED light on the Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.
Bluetooth troubleshooting tips
Try these steps to fix issues with your Logitech Bluetooth device:
● My Logitech device doesn’t connect with my computer, tablet or phone
● My Logitech device has already been connected, but frequently gets disconnected or
laggy
Other useful FAQs that may help to fix the issue:
● Check for Bluetooth Low Energy Support
● Lag and disconnections on Bluetooth devices can be due to WiFi interference
● Resolve Bluetooth Wireless issues on Mac OS X
● Resolve Bluetooth wireless issues on macOS 12
● Resolve Bluetooth Wireless issues on Windows 10
● Resolve Bluetooth wireless issues on Windows 11
● Bluetooth device disconnects after Easy-Switch key is pressed multiple times
● Bluetooth device doesn’t work after computer wakes from sleep mode
● Initializing Profile error with G HUB on a Mac
If you are using a Logitech device and see an Initializing Profile error message while using a
Mac computer, do following to resolve the issue:
1. Open System Preferences.
2. Click Security & Privacy.
3. In the bottom left corner of the Security & Privacy page, click the lock icon.
4. Click the box that says Enable system extensions.
To Next Page
Loading...