6. Click Finish to exit the Logitech Unifying Software. Your mouse should now be
connected.
If this solution doesn't work after a couple of attempts, restart your computer and try the
reconnection process again.
Mouse frequently stops working
If your mouse frequently stops working and you keep having to reconnect it with the USB
receiver, try these suggestions:
Keep other electrical devices at least 8 inches (20 cm) away from the USB receiver
Move the mouse closer to the USB receiver
Move the receiver to a different USB port on your computer
+Cursor does not follow mouse movements
If the cursor isn't following the movements of your mouse, we suggest you:
Use a mouse pad.
Avoid using your mouse on:
o Glass and other see-through surfaces
o Reflective surfaces, such as mirrors and metal desks
o Wood grains and grooved surfaces
Try the mouse on a piece of white paper to make sure it isn't a tracking issue on the
particular surface you're using.
+Uninstalling Logitech SetPoint Software
To uninstall Logitech SetPoint software, first select your operating system:
Windows XP
Windows 7 and Vista
Windows 8
Windows 10
Windows XP
1. Go to Add or Remove Programs:
o Default Start Menu: Start > Control Panel > Add or Remove Programs
o Classic Start Menu: Start > Settings > Control Panel > Add or Remove Programs
2. Select "Logitech SetPoint" from the list.
To Next Page
Loading...
Need help?
General
