Logitech MK955 - Page 6

Connect your keyboard and mouse to multiple
devices
There are 3 Easy-Switch keys each on your keyboard
and the back of your mouse. Connect one device
toeach of them.
When you go through the steps above, the rst Easy-
Switch key on the keyboard and mouse should be
connected to one device already.
STEP 1:
To connect to a second device, press the second
Easy-Switch key for 3 seconds to put it on pairing
mode. The LED light will start blinking.
STEP 2:
Continue with any of the pairing methods above
based on how you connected to your rst device.
Use the image on the le as an example,
if you’ve connected your rst device with
a Logi Bolt receiver, your second device can be paired
via Bluetooth
®
.
NOTE: Please be advised that you can use
Bluetooth
®
connection on all the Easy-Switch keys,
but the Logi Bolt receiver can only be used in one of
them.
Use the same process to pair an additional device
tothe third Easy-Switch key.
1
2
3
2
1
3
1
2
3
3 sec.
6English