10 English
Charging your Controller
1. Plug your USB charging cable into your iPhone or iPod AC adapter*.
2. Plug the micro-USB connector into the Controller’s charging port.
3. The G logo will blink while charging. Once the Controller
is fully charged, the G logo will glow solid blue. Your Controller
is now charged.
4. To charge your iPhone or iPod touch while charging your Controller,
make sure to set the Extended Battery switch to On.
* Only use Apple power adapters compatible with iPhone 5 or iPod touch
(5th generation).
Note: At the end of product life remove battery as shown.
To Next Page
Loading...