Logitech UE Air Speaker User Manual

6 English
Logitech UE Air Speaker
Set up AirPlay using
acomputer (optional)
1. Connect the AC power supply.
Turn on the speaker. Wait until
power-on finishes before proceeding.
(Power-on takes 35 seconds.)
2. Press and hold the Wi-Fi Connect
button for more than 5 seconds.
After 35 seconds the Status indicator
changes from slow blinking green to
fast blinking green to indicate that setup
mode is ready.
3. Open Wi-Fi network settings on
your computer. Select the network called
“Air Speaker Setup”. (For Wi-Fi help
refer to your computer documentation.)
4. Launch an Internet browser.
Enter http://192.168.1.12 in
the address bar. A configuration page
launches.
5. Follow the on-screen instructions.
Be ready to select your Wi-Fi network
and to enter your password. The speaker
will restart. The Status indicator will turn
solid green after the Wi-Fi connection
is made.
Your computer should automatically
reconnect to your Wi-Fi network.
If not, you will need to reconnect it
manually.
Note: If the Status indicator changes
to slow blinking orange, the speaker
did not connect to your Wi-Fi network.
Please visit www.logitech.com/support/
airspeaker for help and try again.
Playing music
The speaker plays music from only
one device at a time. To switch devices,
stop the current device before playing
music on another device.
AirPlay with iOS device (wireless)
1
1. Make sure Wi-Fi is turned on for
your iOS device and your iOS device
is connected to the same network as
the Air Speaker
2. Tap the iPod app or a music app.
3. Find the AirPlay icon and tap it.
4. Choose the Air Speaker from the list
of speakers.
5. Select a song or track to play it.
1
You can also dock your iOS device.

Logitech UE Air Speaker Specifications

General

Brand	Logitech
Model	UE Air Speaker
Category	Speakers
Language	English