Logitech X50 User Manual

Logitech X50
English 5
Connection – via Bluetooth
3s
Pairing your first device
When you turn X50 on for the first time, it automatically goes into pairing mode and searches for
a Bluetooth source device to pair with. X50 works with Bluetooth-enabled devices that support
Advanced Audio Distribution Profile (A2DP), such as smartphones, tablets and personal computers.
Pairing additional devices
To pair X50 with additional source devices, press and hold the Power / Bluetooth pairing button
for 3 seconds. X50 will enter pairing mode, make a sound, and flash its Bluetooth LED while
searching for another device. Once the next device is paired with, X50 will sound to confirm
pairing and the Bluetooth LED will remain solid blue.
X50 will remember the last 8 devices it was connected to. The next time the speaker is turned
on, it will attempt to reconnect automatically to the last device it was connected to before it was
turned o.
X50’s Bluetooth range is approximately 10 meters, or 30 feet. If you take your source device out
of range, the connection will be suspended. X50 will automatically reconnect if the source device
is brought back in range within 5 minutes. After 5 minutes, the active connection will be dropped.
– – – – – – – – – – – – – – – – – – – – – –
10 m (30 ft)

Logitech X50 Specifications

General

Speaker type	1-way
Driver diameter	38.1 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	4 Ω
Frequency range	132 - 20000 Hz
RMS rated power	3 W
Signal-to-Noise Ratio (SNR)	-85 dB
Wi-Fi	No
Bluetooth	Yes
Bluetooth profiles	A2DP
USB connector type	Micro-USB
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Grey, Yellow
Recommended usage	Universal
Battery type	Built-in
Battery voltage	3.7 V
Battery capacity	750 mAh
Power source type	Battery, USB
Battery life (max)	5 h
Battery technology	Lithium
Cables included	USB

Weight and Dimensions

Depth	38.3 mm
Width	85.7 mm
Height	97.5 mm
Weight	142 g