Logitech Z337

 Restart both your speakers and the source device.
 Try un-pairing and repairing your source device and speakers.
3.5mm Auxiliary and RCA
 Check that the cables are securely connected to both the speakers and the source device.
 Try a different source device to ensure the issue isn’t the device.
 Try a different 3.5mm or RCA cable.
Bluetooth device not connecting to the Z337 speakers
If your Bluetooth device won’t connect to your Z337 speakers, try the following:
 Make sure your device is paired with your speakers and that Bluetooth is active (see Set
up the Z337 speakers for pairing help).
 Place your Bluetooth device closer to the speaker - it might be out of range.
 Move your Bluetooth device and speakers away from other wireless sources - you could
be experiencing interference.
 The Z337 can be connected to up to two devices at a time - make sure you don’t already
have two devices connected.
Set up the Z337 speakers
You can connect your devices to the Z337 speakers in three different ways. You can use:
 Bluetooth
 Stereo RCA
 3.5mm Auxiliary
NOTE: When you turn the speakers on, they will default to the last connection used. To switch
between devices, pause the current audio, and then play audio from another connected device