Need help?Do you have a question about the Logitech ZONE WIRELESS PLUS and is the answer not in the manual?
General| Input current | 0.5 A |
|---|---|
| Input voltage | 5 V |
| Receiver dimensions (WxDxH) | 16.2 x 35.5 x 5.3 mm |
| Other operating systems supported | ChromeOS |
| Foldable | Yes |
| Cable length | 1.3 m |
| Control type | Buttons |
| Headset type | Binaural |
| Product type | Headset |
| Product color | Graphite |
| Wearing style | Head-band |
| Recommended usage | Office/Call center |
| Battery type | Built-in battery |
| Battery voltage | 3.6 V |
| Battery capacity | 400 mAh |
| Battery recharge time | 2 h |
| Continuous audio playback time | 14 h |
| Mobile operating systems supported | Android 4.3, iOS |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
| Quantity | 1 |
| Cables included | USB Type-A to USB Type-C |
| Wireless receiver interface | USB Type-A |
| Frequency band | 2.4 GHz |
| Wireless range | 30 m |
| 3.5 mm connector | No |
| Bluetooth version | 5.0 |
| Bluetooth profiles | A2DP, AVRCP, HFP, HSP |
| Connectivity technology | Wireless |
| Impedance | - Ω |
| Ear coupling | Supraaural |
| Headphone frequency | 30 - 13000 Hz |
| Noise canceling type | Active |
| Microphone type | Boom |
| Microphone frequency | 85 - 20000 Hz |
| Master (outer) case width | 243 mm |
| Master (outer) case height | 202 mm |
| Master (outer) case length | 331 mm |
| Master (outer) case weight | 2255 g |
| Package depth | 232 mm |
| Package width | 185 mm |
| Package height | 81 mm |
| Package weight | 458.7 g |
Weight and Dimensions| Depth | 70.7 mm |
|---|---|
| Width | 176.7 mm |
| Height | 174.7 mm |
| Weight | 180.8 g |
Lists the contents of the product package.
Connects the receiver to the computer's USB-A port.
Download and install the Logi Tune Desktop application for setup.
Verify receiver detection and initiate headset connection via Logi Tune software.
Activate pairing mode on the headset by pressing the power button for 3 seconds.
Check for flashing white light indicators on both the receiver and headset.
Finalize pairing when receiver and headset indicators show solid white light.
To Next Page
