WARNING
• Never clean the electronic system, plastic components, signs or bearings with a
high-pressure jet cleaner. It could cause damage.
• Never expose the electronic system to high electrical voltages. This could
damage the control system.
• Never immerse the controller in water or other liquid. This will make the
controller unusable.
If your crane is equipped with add-on lifting equipment (hoist, rotator, etc.):
• The operation of the crane with add-on lifting equipment can differ from the
operation as described in this manual.
• You should therefore study the Operating Manual for the add-on equipment
carefully, before you use the crane.
• Take particular note when placing the crane in to or out of transport position.
1.3. Identification of this crane
Description and identification of the crane:
Mark: ...................
Type: ...................
Serial number: ............................
Manufact. year: ............................
Type: ..................................
Serial number: .................................
Manufact. year: .....................
Mark: .....................
Introduction
Loglift 96S CE 11
To Next Page
Loading...