Load plate
On the plate is the maximum weight that you may lift at a
given reach, with the 1st boom in the optimum position. In
chapter Technical Data in this manual you will find these
values for your crane.
DANGER
Never exceed the maximum weight on the load plate.
Load diagram
The load diagram shows the maximum load your crane
may lift in the entire working zone.
The load curves show the maximum load that may be lifted
at a given reach and height. For a given maximum load, the
possible working zone is to the left of the load curve. The
lifting capacity for some cranes is limited in the high lifting
area.
WARNING
Care must be taken when handling loads in the high lifting area, so the load/tool
does not come into contact with the boom system.
3.6. Signals when using a crane
DANGER
• If it is not possible to see the load and the entire working area clearly the crane
operator is obliged to follow the instructions and signals given by a qualified
person.
• The country-specific regulations for crane operator signals are to be used.
876543210
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
10
m
1650 kg
1950
2280
2680
3240
4250
Safety precautions and warnings
Loglift 96S CE 23
To Next Page
Loading...