Loglift 96S CE - Manual Crane Control Systems; High Seat Manual Operation

5. Manual control system [option]
5.1. Operation from the high seat
The high seat is equipped for using tools and it is operated
by two or four control levers and two foot pedals.
For safety reasons, it is necessary to sit down on the seat
to operate the control levers.
A: Slewing
B: Grapple
C: 2nd boom
D: Rotator
E: Extension
F: 1st boom
Two control levers and two footpedals
(2+2)
A
C
B E
D
F
Four control levers and two foot pedals
(4+2)
Five control levers and one foot pedal
(5+1)
CA B
E
D
F
A
C
B ED
F
DANGER
Take care not to put your foot on the pedals when taking place in the high seat.
Unintentional crane movements can occur.
Manual control system [option]
Loglift 96S CE 39