7.3. Display
With the display unit the status can be monitored and the functionality can be adjusted. The system
needs to be on for the display to light up. It is also possible to save different driver profiles.
From the main menu the operator can step through different submenus by using the buttons on the
display.
TIP
Make your personal adjustments to achieve the best performance.
Buttons
(1) Arrow left
(2) Enter/OK
(3) Main menu
(4) Arrow up
(5) Arrow right
(6) Arrow down
(7) X (Shortcut to submenu)
(8) Back (Shortcut to submenu- weighing)
The control system TimberTronics [option]
Loglift 96S CE 43
To Next Page
Loading...