Loglift 96S CE - Extending Stabilisers and Setting Legs

Operate the stabiliser extensions and stabiliser legs.
Press button , if fitted
From the high seat:
Press and hold the button (3) at the same time.
From the cabin:
Press and hold the button (4) at the same time.
9.4. Extend stabiliser extensions and set stabiliser legs
To ensure the full crane capacity, all the stabiliser extensions and legs must be fully extended and
set to the ground.
WARNING
Take care not to lower the stabiliser leg to
your foot.
3
4
Starting crane operation
Loglift 96S CE 57