Loglift 96S CE - Ending Operation with Cabin

WARNING
Do not park the
grapple horizontally
(an example of
incorrect position is
shown in the
picture).
• The stabiliser legs and stabiliser extensions must be retracted and locked during transport.
• Take the total height of the crane and the load into consideration!
• When moving the vehicle, ensure that there is nobody at the crane’s control position.
• When the crane is installed on a detachable console at the rear of the vehicle, be especially
cautious when uncoupling or recoupling the crane. At such times, nobody is allowed to be near
the crane’s control position.
• Ensure that the load is properly tied.
11.3.1. For cabins [Option]
• Always lower the cabin to the end position
• Close all doors and windows
• Pull down the protective curtain on the cabin front door
• When moving the vehicle, ensure that there is nobody at the crane’s control position.
• When the crane is installed on a detachable console at the rear of the vehicle, be especially
cautious when uncoupling or recoupling the crane. At such times, nobody is allowed to be near
the crane’s control position.
• Ensure that the load is properly tied.
Ending crane operation
66 Loglift 96S CE