Loglift 96S CE - Machinery Directive Compliance

NOTE
Hiab shall at all times have the right to:
• install, maintain and dismantle remote diagnostics tools or similar sensor-based
connectivity capabilities (“Connectivity”) in and from the Equipment; and
• access, send, receive, collect, store and use any and all information and data
gathered through the Connectivity, including but not limited to, information
concerning efficiency, availability, downtime, operation, operating environment,
movement, condition, logon, location and similar information relating to the
Equipment (the “Information”). Such Information may be used for optimizing the
Equipment, or any related equipment or services as well as for Hiab's internal
business and/or operating purposes. Hiab shall be responsible for complying
with applicable laws and regulations related to such Information.
The customer/user shall not in any way remove, disable, or interfere with the
Connectivity or the Information. Any intellectual property rights or other right and
title in and to the Connectivity features and the Information and all their further
developments shall at all times be and remain the exclusive property of Hiab.
1.1.2. The Machinery Directive 2006/42/EC
• Business name and full address where the crane is
manufactured (2):
Factory addresses:
Cargotec Sweden AB Hiab SE-824 83 Hudiksvall
Sweden
Cargotec Poland Sp. z o. o. Ul. Metalowa 2, 73-110
Stargard Szczecinski, Poland
• The Declaration of Conformity, delivered with the crane
contains (1):
• Description and identification of the timber handling
crane (3):
Mark
Type: see chapter Identification of the timber handling
crane.
Serial number
Manufact. year
Declaration of which provisions the timber handling crane
fulfils.
• Name and address of the person authorised to compile
the technical file (4):
Name
Address
• Identity and signature of the person who drawn up the
declaration (5):
Name
Position
Date and Signature
Declaration of conformity with the
Machinery Directive 2006/42/EC
We ............................................
............................................
.....................................
hereby declares that the timber handling crane:
Mark: .....................
Type: .....................
Serial number: ....................
Manufact.year: ....................
• complies with the provisions of the machinery directive
2006/42/EC;
• also complies with the provinsions of the directive on electro-
magnetic compability 2004/108/EC as amended;
• complies with the harmonised standard
EN 12999:2011/A1:2012.
Technical file in accordance with Directive 2006/42/EC, Annex
VII A is compiled by:
Name: .........................................
Adress: ..........................................
...........................................
This declaration is drawn up by:
Name: .................................
Position:.................................
XXXXXXX .................
…………………………………………………………………
཰
ཱ
ི
ཱི
ུ
Introduction
8 Loglift 96S CE