EasyManua.ls Logo

Loglift 96S CE - Diesel Heater Operation; Diesel Heater Operation and Stop

Default Icon
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13. Diesel heater [Option]
13.1. Diesel heater [option]
Factory mounted heater has a switch at the control panel inside the cabin. It is possible to install a
separate switch inside the vehicle cab.
Start the diesel heater
Turn the switch (1) clockwise to activate the heater. The
temperature is adjustable from +10°C to + 40°C, when
correct temperature is reached, the output is reduced.
NOTE
It takes about three minutes for the heater to start up. If necessary, the starting
process can be repeated.
The switch is stepless. A delay for the adjustment can occur.
Turn the switch (2) to adjust the speed of the fan. The fan is adjustable in four steps, off = 0 ,
slow=1, medium = 2 and fast =3.
Stop diesel heater:
Turn the switch (1) anticlockwise to turn off the heater.
DANGER
It is not allowed to use the power supply to turn off the heater.
1
2
Diesel heater [Option]
Loglift 96S CE 91

Table of Contents

Related product manuals