CF CE CD CC CB CA SA SB SC SD SE SF SG
L - 2104 D / E
L - 46152 B / C / D / E
SH
API
SJ
SLCH-4 CG-4 CF-4 CF-2
MIL
5,5
5
DIESEL
AGIP
SUPERDIESEL
MULTIGRADE
15W40
API CF 4
ACEA B2 - E2
MIL - L-2104 D/E
3
11 LD 625/3 - 626/3 ENGINES OIL CAPACITY
Maintenance - Prescribed lubricant - Refilling
Litres
Litres
API / MIL Sequences
OBSOLETE
PETROL
CURRENT
specifications
PRESCRIBED LUBRICANT
In the countries where AGIP products are not available, use oil API SJ/CF for Diesel engines or oil corresponding to the
military specification MIL-L-2104 D/E.
For a temperature of -10°C an oil with a 5W40 viscosity is recommended. For a temperature of -15°C an oil with a 0W30
viscosity is recommended.
OIL VOLUME AT MAX LEVEL (OIL FILTER INCLUDED)
OIL VOLUME AT MAX LEVEL (WITHOUT OIL FILTER)
Danger – Attention
- The engine may be damaged if operated with insufficient lube oil.
- It is also dangerous to supply too much lube oil to the engine because a sudden increase in engine rpm could be
caused by its combustion.
- Use proper lube oil preserve your engine.
Good quality or poor quality of the lubricating oil has an affect on engine performance and life.
- If inferior oil is used, or if your engine oil is not changed regularly, the risk of piston seizure, piston ring sticking,
and accelerated wear of the cylinder liner, bearing and other moving components increases significantly.
- Always use oil with the right viscosity for the ambient temperature in which your engine is being operated.
Danger – Attention
- The used engine oil can cause skin-cancer if kept frequently in contact for prolonged periods.
- If contact with oil cannot be avoided, wash carefully your hands with water and soap as soon as possible.
- Do not disperse the oil in the ambient, as it has a high pollution power.
To Next Page
Loading...
