Lombardini CHD series - Governor Settings and Camshaft; Summary tables of the governor equipment according to the speed variation; Spring for extra fuel supply at starting; Camshaft

- 51 - Workshop Manual LDW CHD _ cod. 1.5302.345 - 6° ed_rev. 05
4
T/4022-T/4002-4022-4002WDL
0051 1 0735565
0051 2
6515565/4515565
**
0081 1 0735565
0081 2
4515565
**
0002 2 5315565
0022 2 5315565/9215565
0052 2 9215565 *
0082 2 5045565
0003 2 5315565/9215565
3061-3051WDL
0051 1 0735565
0051 2 **6515565/4515565
0081 1 0735565
0081 2 **4515565
0002 2 5315565
0092-0022 2 5315565
0082 2 5045565
0003 2 5315565/9215565
105
104
Disassembly / Reassembly
Spring for extra fuel supply at starting
The device is operated automatically: when the engine is
stopped spring 1 acts on the injection pump control lever
2 providing maximum fuel delivery until the governor starts
operating.
Summary tables of the governor equipment according to the speed variation.
Duty
Light
rpm
Weight type
N.Spring
Spring serial number
rpm
Weight type
N.Spring Spring serial number
* Idle frame
** Anti-hunting
* Idle frame
** Anti-hunting
Light
Light
Light
Light
Duty
Duty
Duty
Duty
Duty
Duty
Light
Duty
Duty
Duty
Duty
CAMSHAFT
Camshaft removal
Toremovecamshaftrstremovevalvetappets1, injection pump
follower 2, bearing stop plate 3 and fuel pump control rod 5.
Note: To remove follower 2 loosen screw 4 by three or four
turns.