Lombardini CHD series - Cooling System Overview; Cooling system layout

- 64 - Workshop Manual LDW CHD _ cod. 1.5302.345 - 6° ed_rev. 05
1
6
7
8
9
4
5
3
2
10
140
7
COOLING SYSTEM LAYOUT
Components:
1)Coolantllcap    6) Thermostat
2) Expansion tank 7) Fan
3) Cylinder block 8) Radiator
4) Circulating pump 9) Temperature sensor
5) Coolant temperature warning lamp 10) Heat exchanger (LDW 2004/T - 2204T).
Danger – Attention
- The uid coolant circuit is pressurized.
- Inspections must only be made when the engine has cooled and even in this case, the radiator or expansion
chamber plug must be unscrewed with the utmost caution.
- If an electric fan is installed, do not approach a hot engine since the fan itself could start up even when the engine is
at a standstill.
- Coolant uid is polluting, it must therefore be disposed of in the correct way. Do not litter.
COOLING SYSTEM