EasyManua.ls Logo

Lombardini ECOWIND 350 ECC 350 “C” - 12/24 V User Manual

Lombardini ECOWIND 350 ECC 350 “C” - 12/24 V
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions manual, Operation and Maintenance
AIR-CONDITIONING / GEN-SET SYSTEM
AUS version
TYPE: ECOWIND 350 ECC
MODEL: 350 “C” - 12/24 V
vers. 05 July - MY 2011

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lombardini ECOWIND 350 ECC 350 “C” - 12/24 V and is the answer not in the manual?

Lombardini ECOWIND 350 ECC 350 “C” - 12/24 V Specifications

General IconGeneral
BrandLombardini
ModelECOWIND 350 ECC 350 “C” - 12/24 V
CategoryAir Conditioner
LanguageEnglish

Summary

Warnings and General Information

Introduction and System Operation

Provides a general introduction and explains how the air-conditioning system operates.

Operating Principle and Safety Warnings

Details the system's operating principle and highlights essential general and safety warnings.

Compliance: CE Plate and Standards

Covers the CE identification plate and lists applicable directives and standards for system compliance.

System Description and Technical Data

Air-Conditioning System Components

Describes the main units and their arrangement within the air-conditioning system.

Technical Specifications

Lists detailed technical characteristics, dimensions, weight, fuel, cooling capacity, and electrical data.

Coolant and Operating Limits

Provides characteristics of the coolant and specifies the system's operating limit conditions.

Operation and Usage Guide

Safety Devices and Coolant Risks

Details residual risks from coolant contact and describes the system's safety devices for protection.

Cooling Cycle and Operating Modes

Presents the cooling cycle diagram and explains the different operating modes and instructions.

Control Panel and Keypad Functions

Details the functions and use of the keypad and control panel for system programming and operation.

System Modes: AC, FAN, GENSET, Battery Recharge

Describes the operation of Air Conditioning (AC), Ventilation (FAN), Generator, and Battery Recharge modes.

Timer Functionality

Explains how to use the timer control for automatic start-up or shut-down of the system.

Troubleshooting Guide

Problem Identification and Solutions

Introduces tables identifying common problems, their causes, and recommended solutions.

Power, Engine, and Alternator Faults

Addresses troubleshooting for power supply, engine start, oil pressure, and alternator issues.

System Component Diagnostics

Covers diagnostics for gas pressure, connections, compressor, fans, and various sensors.

Specific System Failures

Discusses troubleshooting for low battery, time exceed, internal failures, and remote control problems.

Maintenance Procedures

General Maintenance Safety

Outlines essential safety rules and precautions for performing maintenance operations on the system.

Oil and Filter Replacement

Details the procedure for replacing engine oil and filters, including recommended types and frequency.

Diesel and Air Filter Maintenance

Explains how to replace the diesel filter and clean or replace the air filter, with safety notes.

Thermodynamic System Maintenance

Covers maintenance of thermodynamic parts, including refilling the system and managing condensation.

Cab Filter Replacement (AUS Model)

Details the procedure for replacing the cab filter specific to the AUS model of the unit.

Scheduled Preventive Maintenance

Preventive Maintenance Schedule

Lists scheduled preventive maintenance tasks, frequencies, and authorized personnel for each task.

Diagrams and Wiring Information

Cable Harness Systems (12V & 24V)

Provides wiring diagrams and component lists for both 12-volt and 24-volt electrical systems.

Unit Wiring Diagrams

Illustrates specific wiring diagrams for the extension/condenser and the split unit.