Lombardini LDW 1003 - LDW FOCS SERIES- TECHNICAL SPECIFICATIONS AND CAPACITIES

REG. CODE
1-5302-351
MODEL N°
50563
DATE OF ISSUE
04.90
REVISION 04
DATE
15.11.99
ENDORSED
COMPILER TECO/ATI
14
LDW FOCS SERIES- TECHNICAL SPECIFICATIONS AND CAPACITIES
TECHNICAL SPECIFICATIONS LDW 502 LDW 602 LDW 903 LDW 1204 LDW 1204/T
No. of Cylinders 2 2 3 4 4
Firing Order 1-2 1-2 1-3-2 1-3-4-2 1-3-4-2
Cylinder Bore (mm) 72 72 72 72 72
Cylinder Stroke (mm) 62 75 75 75 75
Displacement (cc) 505 611 916 1222 1222
Aspiration Type Natural Natural Natural Natural Turbo
Compression Ratio 22.8:1 22.8:1 22.8:1 22.8:1 22.8:1
RPM- maximum 3600 3600 3600 3600 3600
Power- (N)- ISO 1585- KW(CV)-@3600 r/min 9.8(13.4) 11.8(16.0) 17.2(23.4) 24.4(33.2) 31.0(42.0)
Power- (Nb)- ISO 3046-1 IFN- KW(CV)-@3600 r/min 9.1(12.4) 10.3(14.0) 15.6(21.2) 22.0(30.0) 28.5(38.7)
Power- (Na)- ISO 3046-1 ICXN- KW(CV)-@3600 r/min 8.2(11.2) 9.2(12.5) 13.7(18.6) 19.9(27.0) 25.8(35.0)
Torque(MAX)/rpm @Nb output, (Nm) 28.7/2400 34.5/2200 53.5/2000 75.1/2200 98/2400
Maximum Torque Available @ N0. 3 PTO (Nm) 37/1800 37/1800 37/1800 37/1800 37/1800
Fuel Consumption (Nb)@3600 rpm- (g/KWh) 326 282 300 290 305
Oil Consumption (Na)- (Kg/hr) 0.007 0.007 0.012 0.017 0.019
Dry Weight- (Kg) 60 65 85 96 101
Inclination (max)- (30 seconds) 35° 35° 35° 35° 35°
Inclination (max)- (60 seconds) 30° 30° 30° 30° 30°
Inclination (continuous)- APPLICATION DEPENDENT **** **** **** **** ****
Axial Load (max) on Crankshaft (both directions)- (Kg) 300 300 300 300 300
Radial (side) Load - APPLICATION DEPENDENT **** **** **** **** ****
**** - CONTACT LOMBARDINI APPLICATION ENGINEERING DEPARTMENT FOR DETAILS
FLUID CAPACITIES (STANDARD)
Oil Capacity (including oil filter)- (liters) 1.6 1.6 2.4 3.2 4.3
Oil Capacity (less oil filter)- (liters) 1.5 1.5 2.3 3.0 4.1
Coolant Capacity (including std. radiator)- (liters) 2.3 4.0 4.9 6.0 7.5
Coolant Capacity (engine only)- (liters) 0.8 0.9 1.3 1.8 2.0
Fuel Tank-standard (OPTIONAL)- (liters) 4.3 4.3 10.0 15.0 15.0
NOTE: The above cooling system capacities (including radiator) assume that the radiator fitted to your Lombardini
FOCS series diesel engine is the standard Lombardini radiator. Different OEM machines may or may not be fitted with
a standard Lombardini radiator. Always refer to your equipment documentation for capacity details.
GENERAL
I