EasyManua.ls Logo

Lombardini LDW 1003 - MARELLI ALTERNATOR (AA 125 R) - 14 V; 45 A

Lombardini LDW 1003
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REG. CODE
1-5302-351
MODEL N°
50563
DATE OF ISSUE
04.90
REVISION 04
DATE
15.11.99
ENDORSED
COMPILER TECO/ATI
76
VII
ELECTRICAL SYSTEM
MARELLI ALTERNATOR (AA 125 R) - 14V / 45A
NOMINAL VOLTAGE: 14V
NOMINAL CURRENT OUTPUT: 45A
MAXIMUM r/min: 14000 r/min
VOLTAGE REGULATOR: RTT 119 A
BEARING (Pulley End): 6203-2Z
BEARING (Voltage Regulator End) 6201-2Z/C3
ROTATION (VIEWED AT PULLEY END): CLOCKWISE
NOTE:1. Pulley nut torque (1): 60 Nm
2. Use only high temperature grease when servicing bearings.
MARELLI AA 125 R, 14V / 45A PERFORMANCE CURVE
The attached performance curve was plotted at a constant system
voltage
voltage of 13.5V and at an ambient temperature of 25°C.
P1 = Power Output (KW)
I = Current Output (Amps)
n= Efficiency
NOTES:
1. The RPM shown is that of the alternator. The value of the rpm axis
must be multiplied by 1000.
2. Alternator speed is a function of engine speed and the crankshaft
pulley diameter. If the engine pulley is 88 mm, then the alternator
speed ration is 1.3:1. If the engine pulley is 108 mm, then the
alternator speed ratio is 1.6 : 1.

Other manuals for Lombardini LDW 1003

Related product manuals