8
Hotshoe Socket:
Besides using the internal flash, you can attach an external flash to your
Fisheye No. 2 via the Hotshoe Socket [18]. With the shutter set to “N”, both
the internal and external flash will fire simultaneously. With the shutter set to
“B”, the external flash will fire first when you press the Shutter Release Button
[1] and then the internal flash will fire when you release it.
Fisheye Viewfinder:
You may also want to attach the Fisheye Viewfinder [19] via the Hotshoe
Socket [18]. With this, you’ll be able to see your subject as your camera
does – in extreme fisheye view!
Note: You can’t use the viewfinder and an external flash at the same time.
REWIND & UNLOAD
When your film is finished, the Advance Wheel [9] will no longer advance
and the Exposure Counter [10] should show the final frame number of your
film. Rewind your film by slowly turning the Rewind Crank [3] clockwise – as
shown by the directional arrow. Keep turning it until you feel the tension
completely drop off.
To Next Page
Loading...
