.3.
fault.
f) Before leaving the operating position to repair, adjust, check or remove of things
jammed between blades, always remember to shut off the engine first!
g) If the machine is to be left uncared by the operator, all necessary preventive
measures, such as disengaging power output shaft, lowering of accessory devices, shift to
neutral position of gear shift lever, and shutting off the engine shall be taken first!
h) Before cleaning, repair or checking the machine, the operator must shut off the
engine and ensure all moving parts are in a stationary state!
i) Engine’s emission is hazardous, so never try to run it indoors!
j）Never operate the tiller without proper protection equipment, guard or other
protection devices in place!
k) When the machine is running, always keep it away from children and pets!
l) Never overload the machine with a big tilling depth and a high speed!
m) The machine is not allowed to run at a high speed on a slippery road. Watch back to
take care when driving backward!
n) Never allow any looker-on to approach a running machine!
o) Only the accessory devices and equipment (like the counter weight) allowed by the
manufacturer of the tiller may be used
To Next Page
Loading...
Need help?
General
