To Next PageTo Next Page
Need help?Do you have a question about the LONCIN LX500ATV and is the answer not in the manual?
General| Brand | LONCIN |
|---|---|
| Model | LX500ATV |
| Category | Offroad Vehicle |
| Language | English |
Emphasizes reading the manual for crucial safety information.
Specifies the minimum age for operating the ATV to ensure rider safety.
Advises on the importance of proper instruction for safe ATV operation.
Clarifies that the ATV is designed exclusively for off-road use.
Explains the meaning of warning, caution, and note symbols used in the manual.
Displays maximum load capacities for front/rear carriers and storage.
Outlines essential safety rules for ATV operation, including gear and alcohol.
Identifies key controls like the drive select lever and its warnings.
Warns against operating the ATV under 16 and carrying passengers.
Details general risks associated with ATV operation and essential safety precautions.
Stresses the need for training and adherence to age recommendations for safe operation.
Lists essential safety apparel like helmets, gloves, and boots for rider protection.
Provides guidance on safely riding on hills, rough terrain, and slippery surfaces.
Covers precautions for riding through water and over obstacles.
Space to record VIN and model for reference and parts ordering.
Shows locations for identifying the ATV's unique frame and engine serial numbers.
Illustrates the location of various ATV components for easy identification.
Explains the functions of the ignition switch and the purpose of various indicator lights.
Details the speedometer, odometer, fuel meter, and other display indicators.
Describes the operation of switches for lights, horn, turn signals, and starter.
Explains the operation of the 2WD/4WD and differential lock switches.
Details the front/rear brake levers, pedal, and parking brake mechanism.
Covers the fuel tank cap and the fuel cock operation (ON, OFF, RES).
Explains the choke operation and how to remove/install the seat.
Specifies maximum load capacities for front and rear carriers.
Provides guidelines and cautions for using the ATV's accessory power socket.
A table outlining essential items to check before operating the ATV.
Instructions for checking brake levers, pedal, fluid level, and leakage.
Guidance on checking fuel level, recommended fuel type, and engine oil level.
Details on inspecting tires for pressure, wear, and damage.
Step-by-step instructions for starting the engine, including cold and warm starts.
Explains how to shift between 2WD, 4WD, and reverse gears.
Guidelines for the initial engine break-in period and proper parking procedures.
Information on vehicle loading, cargo, and trailer towing capacities and safety.
Introduction to basic ATV riding principles and familiarization.
Essential tips for riding with care, judgment, and avoiding common hazards.
Specifies necessary safety gear for riders to prevent injuries.
Advice on operating at appropriate speeds and warnings against ATV modifications.
Guidance on riding over rough terrain, through water, and avoiding obstacles.
Instructions on proper turning and controlling skids for safe maneuverability.
Techniques for safely ascending, descending, and crossing slopes.
Introduces periodic maintenance importance and the included tool kit.
Provides charts for routine maintenance intervals and lubrication points.
Detailed steps for checking, replacing, and filling engine oil.
Instructions on how to clean the air filter element and foam cover.
Covers checking brake fluid, pad wear, and fluid replacement procedures.
A chart to help diagnose and resolve common operational issues.
Steps for washing and drying the ATV to maintain its condition.
Procedures for preparing the ATV for extended storage to prevent deterioration.
Safety precautions for refueling and handling fuel when storing the ATV.
Physical dimensions, seat height, and total weight of the ATV.
Details on engine type, displacement, bore/stroke, and transmission.
Specifications for electrical components, battery, and brake systems.
Legal restrictions and definitions related to modifying noise control systems.
A table to record maintenance intervals, dates, and service details for warranty purposes.
Visual representation of the ATV's electrical system layout and connections.
