LCS-US204
USB 2.0 Hi-Speed Device Server
Quick Installation Guide
①
①①
①
.
Introduction
This document describes the steps for installing and configuring
LCS-US204 as a USB device server in the Windows environment.
LCS-US204 uses LAN (standard Ethernet) and wireless module
(802.11b/g) to access network. Please refer to the User’s Manual in the
bundled CD-ROM for more details.
②
②②
②
.
Package Contents
If any item is missing, please contact the shop where you bought this
product.
-
One LCS-US204 USB 2.0 Device Server (x1)
-
One Control Center Software CD (x1)
-
One DC IN 12V/1.5A Power Adaptor (x1)
③
③③
③
.
OS Supported
Windows 2000/XP/2003/Vista
④
④④
④
.
Physical Description
1. Power Adaptor Connector: for DC IN 12V/1.5A power adaptor
2. Init Button: for restoring the configurable parameters to the default
values
3. Wireless Station: IEEE 802.11 b/g wireless station with antenna
4. Ethernet Connector: connected to a twisted pair category 5 cable
5. USB Host Ports: USB 1.1/2.0 low, full, and Hi-Speed compliant
6. Indicators
Power Indicator is lit while power is applied. If it is not lit, or if
it blinks, there is a problem with the USB device server or
Power Adapter.
LAN Indicator blinks to indicate wired network activity. If it is
To Next Page
General