Need help?Do you have a question about the Look KEO BLADE CARBON and is the answer not in the manual?
Lists all necessary tools for pedal lubrication procedure.
Unscrew the pedal axle using the Allen key and maintenance tool.
Apply grease to the axle and threadlocker to the nut as illustrated.
Insert the pedal axle back into the pedal body.
Tighten the nut to torque and let the threadlocker dry.
General| Material | Carbon |
|---|---|
| Stack Height | 14.8mm |
| Platform Width | 67mm |
| Platform Area | 700 mm² |
| Platform Material | Carbon |
| Axle Material | Chromoly |
| Float | 0°, 4.5°, or 9° (depending on cleat) |
| Cleat Compatibility | KEO |
| Cleats | KEO Cleats |
| Bearings | 1 cartridge bearing, 1 needle bearing |
To Next Page
