Look Optimum 765 - Important Information; Product Presentation

FR
IMPORTANT INFORMATION
PRÉSENTATION DU PRODUIT
Your 765 Optimum has been developed and
designed to LOOK specications to offer the best
possible power transfer thanks to an endurance-
oriented frame geometry and optimized comfort.
This is in part due to the integration of components
specically-designed for the frame. The result
is a more coherent overall system, improved
performance and full integration of all cables and
hoses.
The 765 Optimum features a number of innovative
features, including a new headset with special,
newly-sized bearings for seamless internal routing
through the spacers, an under-stem cable guide and
a new stem design to create a single, harmonious
unit.
Here are the key components of your new 765
Optimum:
- Integrated headset, 1”1/8 top and bottom.
- X12 thru axles. Front: 100mm M12 P1,5 total length
115mm. Rear: 142mm M12 P1,5, total length 160mm
- T47 bottom bracket, 85,5mm wide
- Chainstay thickness for disc brake caliper mount:
25mm
- Seatpost diameter : 27,2mm
- Max. tire width: 34mm
TO MOUNT THE DEDICATED LOOK LS3 STEM, PLEASE REFER TO THE CHAPTER COVERING THE
NEW CABLE INTEGRATION IN THIS NEW HEADSET.
Warning : LOOK products are designed and
optimized for cyclists weighing no more than
100 Kg (220.5 lbs). Road bikes are designed
for use only on paved roads and in situations
where the tires do not lose contact with the ground.
Jumping is forbidden.
Counterfeit warning : The use of counterfeit
products is extremely dangerous and may
cause you and/or others to fall, resulting in
serious injury or even death.
!
!
If you cannot access our website, your local
retailer can provide you with a printed copy
of our warranty policies.
For more information, please refer to our website
www.lookcycle.com > WARRANTY POLICY >
COUNTERFEIT
For more details on IMPORTANT INFORMATION
to be aware of, please refer to our website
www.lookcycle.com, WARRANTY POLICY >
IMPORTANT INFORMATION.
5