15
FITTING THE SEAT IN THE VEHICLE
“Group II” /15 - 25 kg/
IMPORTANT: Before fitting the seat remove the shoulder straps, buckle and crotch strap and
lap strap.
1. Place the child safety seat on the vehicle’s seat ensuring it is firmly pressed against the car seat
backrest. (Fig. 1)
2. Place the child in the child safety seat.
3. Fasten the seat belt making sure that both sections of the seat belt webbing go under the armrest
closest to the buckle, the diagonal belt goes through the belt guide on the side of the headrest. (Fig. 2)
4. Make sure the seat belt has not become twisted. (Fig. 3) Also check that the cover is not impeding
the movement or fit of the seat belt webbing in any way.
Fig. 1 Fig. 2 Fig. 3
FITTING THE BOOSTER SEAT
“Group III” /22 - 36 kg/
IMPORTANT: Remove the backrest of the car seat.
Backrest
PUSH
Booster Seat
To Next Page
Loading...
