Lorex B862AJ Series - Wiring the Doorbell Chime; Identify Your Chime Type; Mechanical Chime Wiring Guide

EN - FAQs
Why is the Video Doorbell not turning on?
• Make sure the breaker is turned on.
• Make sure the power source that supplies the video doorbell is 16-24 VAC.
• Connect the video doorbell using the provided USB power cable. Make sure the USB cable is
connected to a 5V 2A USB power adapter (not included) that is also connected to a power
outlet.
• Select the correct option when connecting a Wi-Fi Chimebox. During setup, select Not Now. Do
not select Mechanical Chime or your doorbell will not power on.
How do I change the Video Doorbell's ringtone?
1. Open the Lorex app and tap
above the camera’s thumbnail.
2. Tap Sound Settings > Doorbell RingtoneSound Settings > Doorbell Ringtone, and then select the ringtone you want to use.
How do I activate the Deterrence Light and/or Smart Security LED when motion is detected?
1. Open the Lorex app and tap
above the camera’s thumbnail.
2. Tap Light Settings, and then to enable Activate Deterrence Light on Detection. Tap
Deterrence Light Mode to select a solid or ashing light, and then Light Brightness to adjust
the brightness level.
3. Tap to enable Activate Status LED on Detection, and then LED Color to set a custom
Smart Security LED color.
How do I enable the Night Light Mode?
1. Open the Lorex app and tap
above the camera’s thumbnail.
2. Tap Light Settings, and then to enable Night Light Mode. Tap Edit Schedule to set custom
times for the night light to turn on and off.
App Setup • Assemblage à l’aide de l’application • Configuración
de la aplicación
1. Download / Téléchargez / Descargue Lorex app.
2. Tap / Touchez sur / Pulse
+
.