Lorex LNC216 Series - Using 2-Way Audio (Intercom); Recording Video to Android

128
iPad® App
3. Under Temperature, select ON to enable temperature notifications.
4. Under T
emperature unit, select F° or C°.
5. Under Higher bound, sel
ect the high temperature value. You will receive a
notification if the temperature near the camera goes above this value.
6. Under Lo
wer bound, select the low temperature value. You will receive a notification
if the temperature near the camera goes above this value.
7. Tap Updat
e to save your settings.
7.4.5 EDITING CAMERA MOBILE STREAMING SETTINGS
Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap next to the camera.
2. Tap Str
eam Settings.
3. Under Bandwidth, sel
ect the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under Auto, sel
ect ON to have the camera automatically select the resolution and
frame rate based on available bandwidth. Or, select OFF to manually select the
resolution and frame rate. If you select OFF, configure the following:
Select Mobile Bandwidth
Enable/disable auto resolution and
frame rate adjustment
Select Resolution
Enable/disable audio streaming to
iPad®
Select Frame rate