144
Configuring the system remotely
User Menu
You can add new users to the system, and customize the type of menus they have access to.
To configure the User menu:
1 Cl
ick REMOTE CONFIG>System>User.
2 Se
lect a user from the User List that you wish to configure.
3 Co
nfigure the following:
• User
Name: Enter the desired user name.
• Password: Enter the user password.
• Confirm: Re-enter the user password.
• Active: Select Enable to add the user. Select disable to de-activate the user account.
• Password Enable: Select Enable or Disable to enable or disable the user password.
To Next Page
Loading...
