12
Mouse Control
Mouse Control
The system is designed for mouse navigation. To use the mouse, connect the mouse to the
rear USB panel on the DVR.
1 Use the
mouse buttons to perform the following:
• Left-Button:
Click to select a menu option;
d u r i n g l i v e v i e w i n g i n s p lit-screen, double-click
on a channel to view the selected channel in
full-screen.; double-click the channel again to
return to split-screen view
2 Right-B
utton:
• Click to open the Sub-Menu (see “Using the
Sub-Menu”
on page 18.).
• In menus, use the right-button to exit menus.
3 Scroll-Wheel: N
o function.
*8-channel model shown
4/8 Channel Model
Plug the mouse into the top USB port.
Plug the mouse into the top USB port
16 Channel Model
To Next Page
Loading...
