48
2 Configure the following:
• Day
light Saving Time: Select Enable
• Time Offset: Select how many hours the
time should move forward or backward
• Daylight Saving Time Mode:
• Start Time: Select the Month, day, and
time DST begins.
• End Time: Select the Month, day, and time
DST ends.
3 Cl
ick Apply to save your settings.
Configuring User Settings
The User Settings menu allows you to
add
users, and edit user and admin
passwords for the system.
To create a new user:
1 Cl
ick User Setting from the Advance
menu.
2 Click the check
box under "SEL" beside
the user that you wish to add.
3 Cl
ick Edit to open the user settings
window.
4 Configur
e the following:
• User
Enable: Select ENABLE to add the
user.
• User name: Click the blank field to enter
a desired user name.
• Password Enable: Select ENABLE to
enable a login password for the user.
• Password: Enter your password.
• Confirm: Re-enter the same password to
confirm your password selection.
5 Click Appl
y to save your settings.
Editing User Menu Authority:
1 Click User
Setting from the Advance
menu.
2 Click the
check box under "SEL" beside
the user that you wish to edit.
3 Click AUTHORI
TY. Select the menus that
you want the user to have access to.
4 Click Appl
y to save your settings.
To edit a User or Admin password:
1 Click User
Setting from the Advance
menu.
2 Click the
check box under "SEL" beside
the user or admin account you wish to
change the password for.
3 In the P
assword Enable drop-down menu,
select ENABLE.
4 In
the Password and Confirm fields, enter
the new password of your choice.
5 Click Appl
y to save your settings.
To Next Page
Loading...
