Lotus Elise 2001 User Manual

Provides overall engine specifications and configuration details.

Details specifications for the cylinder head, including material and dimensions.

Covers camshaft specifications and valve timing data.

Specifies valve angles, stem diameters, and clearances.

Details valve spring free length and load specifications.

Provides crankshaft end-float, thrust washer thickness, and journal diameter.

Specifies new ring to groove clearance and new ring gap.

Details piston diameter and clearance in bore specifications.

Specifies cylinder liner bore dimensions.

Lists outer rotor to housing clearance and rotor and end float.

Specifies nominal setting and thermostat open/fully open temperatures.

Lists overall vehicle dimensions, including length, width, height, and wheelbase.

Details fluid capacities for engine oil, coolant, and fuel.

Specifies wheel size, bolt torque, and tyre identification.

Details suspension type, geometry, and alignment specifications.

Details suspension type, geometry, and alignment specifications.

Lists wattage for light bulbs and battery specifications.

Provides gear ratios and mph/kmh for each gear.

Details friction plate diameter, thickness, and rivet depth.

Specifies disc size, operation, and parking brake details.

Lists steering type, lock to lock turns, and gear ratio.

Provides fuel consumption figures for urban, extra-urban, and combined driving.

Describes the chassis construction and materials used.

Outlines the procedure for checking chassis straightness.

Details the rear subframe construction and fitting of longerons.

Describes the construction of body panels and their materials.

Highlights features of the composite body construction.

Provides guidance on cleaning and washing the vehicle.

Details procedures for assessing and repairing accident damage.

Lists materials used for bonding body panels.

Explains the front crash structure and its components.

Describes the construction and function of the windscreen frame.

Covers the removal and replacement of sill panels.

Details the construction and replacement of the rear bulkhead.

Details the soft top fitting and removal procedures.

Describes the removal and refitting of front bonnet panels.

Covers the removal and bonding of the engine cover lid.

Details the removal of the door hinge cover panel.

Outlines the removal of the front clamshell assembly.

Details the removal of the rear clamshell.

Explains the replacement of door mirrors.

Covers door hinge adjustments and door beam fixing.

Details the removal and refitting of the door shell.

Explains door glass adjustment and winder mechanism.

Describes the fitting of door seals and weatherstrip.

Details the door latch mechanism and its components.

Covers the removal and refitting of the instrument binnacle and dash panel.

Outlines the procedure for replacing the windscreen.

Provides information on decal placement on the rear.

Describes the front suspension layout and components.

Details ride height, alignment, camber, castor, and steering axis inclination.

Explains the anti-roll bar mounting and its drop link.

Provides step-by-step instructions for suspension component removal and refitting.

Details the procedure for replacing front wheel bearings.

Describes the rear suspension components and layout.

Covers ride height, alignment, camber, and castor specifications.

Provides instructions for disassembling and assembling the rear suspension.

Explains the procedure for adjusting rear bump steer.

Details the process for replacing rear wheel bearings.

Introduces the engine, its designation, and related publications.

Covers engine oil level checks, topping up, and engine oil change.

Provides procedures for removing and replacing the engine.

Lists special tools required for engine overhaul tasks.

Introduces the transmission type and its application.

Explains the gear selection and linkage system.

Details transmission fluid type and change intervals.

Covers driveshaft components and replacement procedures.

Outlines the steps for removing and refitting the transmission.

Lists special tools and procedures for transmission overhaul.

Describes the wheel and tyre construction and handling.

Provides specifications for standard wheels and tyres.

Offers guidance on fitting winter tyres and snow chains.

Explains the use of the emergency tyre inflator kit.

Describes the steering system, including column and rack components.

Covers steering wheel removal and refitting.

Details the upper column assembly and its dimensional checks.

Explains the intermediate column and its adjustments.

Covers front wheel alignment and gaiter replacement.

Provides procedures for removing and replacing the rack and pinion assembly.

Details the adjustment procedure for the rack bar thrust pad.

Overview of the brake system and pedal box components.

Procedures for checking and changing brake fluid.

Details the replacement of front brake pads.

Covers the replacement of rear brake pads.

Explains the operation and adjustment of the parking brake.

Information on brake disc thickness and replacement.

Procedures for replacing the tandem brake master cylinder.

Covers the removal and refitting of the pedal box assembly.

Details the overhaul procedures for brake calipers.

Describes the engine cooling system components and operation.

Covers coolant checks and antifreeze/corrosion inhibitor requirements.

Step-by-step instructions for draining and refilling the coolant.

Details radiator and cooling fan removal and refitting.

Explains how the engine management system controls the cooling fan.

Covers the routing and fitting of radiator feed and return pipes.

Refers to Section EE for water pump and thermostat information.

Overview of the fuel system components and operation.

Procedures and precautions for refuelling the vehicle.

Safety precautions related to fuel handling.

Covers fuel filter replacement.

Details fuel tank removal and refitting.

Explains the fuel pump/sender assembly and its removal/refitting.

Describes the function and location of the charcoal canister.

Information on the vehicle security system and its operation.

Details switches, instruments, and tell-tale lamps.

Identifies fuse and relay locations and ratings.

Covers optional audio equipment like aerial and speakers.

Information on battery maintenance, cables, and earthing points.

Details the windscreen wiper mechanism and its components.

Explains the routing of the vehicle's electrical harnesses.

Covers headlamp and front lamp assembly replacement.

Lists the available electrical circuit diagrams.

Lists recommended lubricants for engine, transmission, and brake systems.

Details the periodic maintenance schedule based on mileage.

Outlines the pre-delivery inspection checklist.

Describes the operation of the heating and ventilation system.

Covers the removal and adjustment of control cables.

Details the removal and refitting of the heater unit.

Explains the air distribution unit and its components.

Describes the clutch system and its components.

Details the procedure for adjusting the clutch slave cylinder.

Explains the operation of the hydraulic release system.

Covers the removal and refitting of the clutch assembly.