Filler Cap: The fuel filler cap is located in the right hand rear
quarter panel, concealed beneath a spring loaded flap.
To remove, pull open the flap and turn the cap anticlockwise.
As the cap is turned, any slight pressure differential between the
tank and atmosphere will be released, and a brief hiss may be
heard, which is completely normal. Note that the cap is tethered
by a short strap to protect against loss.
To refit, place the cap into the filler neck and turn clockwise
until the ratchet mechanism clicks several times. Push the flap
closed.
Filling Procedure:
Insert the pump nozzle fully into the neck, and
fill until the auto-shut off mechanism is triggered. Do not attempt
to ‘brim’ the tank to the top of the filler neck, as expansion of the
fuel due to temperature change (cold underground fuel storage)
may cause flooding of the fuel tank breather system charcoal
canister, or spillage of fuel.
The useable fuel tank capacity is 10.6 U.S. gall. (40 litres).
ohs101a
FUEL FILLER FLAP & CAP
External Operations
To Next Page
Loading...
