116
3
2
1
High/Low Beam Headlights
1
High beam flash: Pull the stalk
rearward toward you to activate.
2
Constant high beam: With the
lighting ring in either AUTO or
position, push the stalk forward to
activate.
3
Deactivate by pulling the stalk
backwards.
This symbol is illuminated in the
driver’s display screen when the
main beam lights are activated.
Rear Fog Light
Activated with the vehicle in ignition
position ll and either
or AUTO se-
lected.
Press the
button on the front of the
stalk to switch the light on or off.
This symbol is illuminated in the
driver’s display screen when the
rear fog lights are activated.
The switch will default to off whenever
the headlamps or ignition are switched
off.
NOTE: The regulations on the
use of rear fog lights may be vary
between different countries.
1
2
2
1
Direction Indicators
1
1
Short flash: Move the stalk up or
down until resistance is felt and
release. The indicator lamps will
flash three times*.
2
2
Continuous flash: Move the stalk
up or down past the resistance
point to its end position, the stalk
will remain in this position.
The corresponding symbols
illuminate in the driver’s display
screen during operating.
The stalk will remain in position until
moved back manually, or automatically
by movement of the steering wheel.
*If the function is deactivated via the
centre display, the lamps will flash
once, see page 119.
LIGHTING