113
Traffic Sign Recognition
(if fitted)
Using the forward camera and viewed
on the driver display, the traffic sign
recognition system can be used to
notify you of the speed limit and
certain traffic regulations on the road
you are currently driving on. The
system can also be used as an alert if
you exceed the recognised speed limit.
WARNING: Traffic sign
recognitionis a supplementary
driver assistance system, intended
to make driving safer, it cannot
function in certain traffic, weather
or road conditions.
WARNING: Before using this
system, the driver is advised to
read all traffic sign recognition
information in this handbook to be
aware of its limitations.
WARNING: Driver assistance
systems are developed to support
the driver and not to replace the
driver’s attention. The driver is
always responsible for ensuring
the vehicle is driven safely at the
appropriate speed and distance
to other vehicles, in accordance
with current traffic rules and
regulations.
NOTE: Traffic sign recognition
uses information from the camera,
and signs which may be obscured
by other vehicles or trees may not
be recognised.
NOTE: The traffic sign recognition
system can operate between 0 –
155 mph.
If traffic sign recognition is activated,
once the vehicle passes a recognisable
road sign, it is displayed as a symbol in
the lower centre of the driver display.
A maximum of 1 road sign per side can
be shown.
Any speed limit sign shown in the
driver display will blink if the vehicle
speed exceeds the speed limit shown
on that sign by more than 5 mph.
1
Speed limit sign.
2
Supplementary sign.
DRIVER ASSISTANCE