114
Traffic sign recognition is selected/
deselected from the Car Settings →
Driver Support menus in the centre
display, see page 127.
NOTE: If deselected, this system
will default to active on the next
drive cycle, only the sensitivity
level previously set will remain
unchanged.
Traffic Sign Recognition Limitations
The traffic sign recognition system may
have difficulty reading signs that are:
– Faded.
– Located in a curve.
– Rotated or damaged.
– Positioned high above the road.
– Fully/partially obscured or poorly
positioned.
– Completely or partly covered with
frost, snow and/or dirt.
Traffic sign recognition uses the
camera unit, which has some general
limitations, see page 123.
Rear Cross Traffic Alert
(if fitted)
Rear cross traffic alert is activated
when reversing or if the vehicle rolls
backwards, to alert you if traffic is
crossing behind the vehicle.
Rear cross traffic alert is intended to
detect vehicles, but bicycles and other
smaller objects may also be detected.
When an object is detected
approaching from the rear of the
vehicle, the following alerts are
activated:
Parking Assist Image in Centre
Display
graphic appears when an object is
approaching from the left side.
graphic appears when an object is
approaching from the right side.
graphics appear when objects
are approaching from both sides.
DRIVER ASSISTANCE
To Next Page
Loading...
