116
DRIVER ASSISTANCE
Blind Spot Detection
(if fitted)
Blind spot detection is intended to
provide a warning of other vehicles
approaching from behind in the
vehicles blind spot. Combined with
blind spot detection is the close vehicle
warning system, which alerts the
driver if another vehicle is approaching
quickly from behind in an adjacent lane
and there may be a risk of collision
if the driver decides to make a lane
change.
- - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - -
12
Zone Vehicle Location/Status
1
Blind spot dectection.
2
Close vehicle warning.
When the blind spot detection system
detects a vehicle in zone 1, an
indicator symbol in the corresponding
door mirror will illuminate continuously.
When the close vehicle warning system
detects another vehicle in zone 2
approaching quickly, an indicator
symbol in the corresponding door
mirror will illuminate continuously.
If you then use the direction indicator
on the side on which the warning is
given, the
indicator symbol will flash,
and an audible warning will sound.
WARNING: Before using this
system, the driver is advised
to read all blind spot detection
information in this handbook to be
aware of its limitations.
WARNING: Driver assistance
systems are developed to support
the driver and not to replace the
driver’s attention. The driver is
always responsible for ensuring
the vehicle is driven safely at the
appropriate speed and distance
to other vehicles, in accordance
with current traffic rules and
regulations.
WARNING: This function is a
supplementary driver assistance
system, intended to make driving
safer, it cannot function in certain
traffic, weather or road conditions.
WARNING: The blind spot
detection system will not function
whilst driving around sharp bends
in the road.
To Next Page
Loading...
