134
CENTRE DISPLAY SCREEN
Quick Panel
The quick panel provides shortcuts
to certain vehicle option presets and
settings.
Opening the Quick Panel
Access the quick panel from the home
screen either by:
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tapping the quick button at the
top of the navigation bar.
The notifications option is also availa-
ble from the quick panel.
WARNING: Do not become
distracted by the centre screen
display whilst driving. You could
cause an accident.
PANNEAU RAPIDE
+QUICK PANEL
ESC o
Parking assist
system
Lane departure
warning
Speed Limiter
(automatic)
Parking assist
camera
Blind spot
detection
Door opening
warning
NOTIFICATIONS
Quick Panel Options
NOTE: Other options may be
available dependent on vehicle
specification or market.
Selecting Options
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap the required button.
A message describing the
application option selected
or further actions required is
displayed.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
If preset levels are available, tap
on the button to select the level
required.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap on the button to deselect the
option.
Closing the Quick Panel
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
Swipe up anywhere on the screen.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap the handle icon at the bottom
of the screen, an animation is
displayed showing that the screen
needs to be swiped upwards to
close.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
Access the notification centre
by swiping from right to left
anywhere on the screen.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap ‘Notification’ to open the
notification screen.
To Next Page
Loading...
