145
CENTRE DISPLAY SCREEN
An audible beep and message on the
screen indicates that the assistant
is awake and listening for a voice
command.
NOTE: Commands from the driver’s
display are limited to navigation
and phone options.
Using the Centre Display
Ensure that the voice search/voice call
screens for navigation or phone widget
options are not shown in the driver’s
display.
Command Options Available
– Media*
– Mute/unmute media volume*
– Navigation*
– Phone*
– Climate control, page 184.
*See separate infotainment guide.
NOTE: Only certain functions
of these vehicle systems can be
controlled using voice assistant.
Tap the button on the left-hand
steering wheel keypad to wake up
the voice assistant.
An audible beep and a pop-
up screen with a message
will appear in the centre
display. The assistant is
now listening and you can
say your command.
Cancelling Voice Assistant
From the steering wheel keypad either:
Tap briefly on the button
and say “Cancel”.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap and hold the button until
you hear two beeps. This cancels
the system even if the voice
assistant is speaking.
From the centre display either:
– If an arrow is displayed in the
screen, tap it to cancel voice
assistant.
– Tap outside of the voice
assistant pop-up screen.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
96
1.4.6.5 Keyboard Key Pop-ups Continued
Keyboard language key also has secondary functions when the tap and hold gesture has
been actioned. Keyboard languages key can display a maximum of 3 languages as well
as the Language settings button, tapping this button will take the user to the language
settings within the settings application.
Examples of language selection key with two and
one language available.
User can also switch between languages by swiping the
space bar or performing a single tap on language button.
Once language has been changed, language title will be displayed on
the space bar for 2 seconds then disappear.
1.4. MODULES & COMPONENTS
Fig. 1 Fig. 5
Fig. 6
Fig. 3
Fig. 2
Fig. 4
– Swipe left to right on the voice
assistant pop-op to drag it out
of the centre display.
From the listening state
either tap the button the
right-hand steering wheel
keypad or say ‘Cancel’.
Automatically Cancelling Voice
Assistant
Voice assistant will timeout
automatically when no speech or touch
input is received in any state after 5
seconds.
It will cancel if Interrupted by any other
application or system notification,
(such as receiving an incoming call
whilst speaking).
To Next Page
Loading...
