158
2
1
1
2
Power Door Windows
You can operate both of the power
windows using the window switches
from the control panel in the driver’s
door panel. The passenger can operate
their window by using the window
switch in their door panel.
1
Moving the switches up or
down slightly will raise or lower
the windows for as long as the
switches are held in position.
2
Moving the switches up or
down fully, and then releasing
will raise or lower the windows
automatically to their end
positions.
WARNING: Do not leave children
unattended in the vehicle.
WARNING: Before closing a
window, always check that no
person or object will be trapped.
WARNING: Careless window
operation could be dangerous,
especially to children. Ensure
that all passengers are also made
aware of this danger.
WARNING: Do not leave children
or animals in a parked car with
the windows fully closed in hot
weather conditions.
The vehicle must be in ignition mode I
or II to operate the power windows. The
power windows can be operated for a
few minutes in ignition mode 0, (but
not after a door has been opened).
Automatic Drop/Raise
To ease door closure and optimise the
sealing of the door glasses against the
door seals, a fully raised window will
automatically drop a small distance
when the door is opened and rise again
after the door is shut.
Pinch Protection
If either of the door windows is blocked
by any object while opening or closing,
the movement stops and then
automatically reverses by 2” (50
mm) approximately from the blocked
position (or to fully open position).
To override pinch protection when
closing has been cancelled, e.g., when
ice is formed, continue to press the
window switch in the required direction.
If the battery supply is interrupted,
the one touch down/up, auto drop
and pinch protection features will not
function which could increase risk of
damage to the door window seals.
WINDSCREEN, WINDOWS, MIRRORS AND SUN VISORS
To Next Page
Loading...
