Lotus EMIRA V6 - Air Temperature; Air Distribution

175
CLIMATE CONTROL
Air Temperature
To adjust the cabin air temperature,
rotate the control ring around the A/C
button clockwise to increase
temperature and counter-clockwise to
decrease.
The temperature setting temporarily
appears in the centre display as well as
being permanently shown on the
climate navigation bar of the centre
display.
See page 180 for centre display
settings.
Air Distribution
Air flow enters the vehicle cabin by a
combination of the:
– Windscreen demister and side
window air vents.
– Footwell air vents.
– Face level instrument panel air vents.
The current air distribution setting
temporarily appears in the centre
display as well as being permanently
shown on the climate navigation bar of
the centre display.
Pressing on the air distribution switch
briefly changes/cycles the air flow
between a combination of these vents,
providing 6 different settings.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Footwell.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Footwell and face.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Face.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Face and windscreen.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Windscreen.
115
2.2 Hardware Functionality
Left Rotary
The left rotary controls the tem-
perature level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the temperature and counter-clock-
wise will decrease the temperature.
Pressing the button in the middle
of the rotary will activate the A/C
function. Pressing again will deacti-
vate this function.
Buttons
There are four hardware buttons in
the CCSM, including (from left to
right); (1) Air distribution, (2) Front
demist, (3) Rear demist, (4) Recir-
culation.
The status of each button’s function
is indicated in each respective but-
ton. The exception is Air distribu-
tion, where there is no indication.
Right Rotary
The right rotary controls the fan
speed level. Rotating the rotary
clockwise (as in Fig. 1) will increase
the fan speed and counter-clock-
wise will decrease the fan speed.
Pressing the button in the middle
of the rotary will activate the Auto
climate function. Pressing again will
deactivate this function.
1 2 3 4
Fig. 1 Hardware buttons and rotaries located in the CCSM.
Air Distribution Toggle
The Air distribution button toggles
between the following six states:
A - AB - B - BC - C - CA, where A =
Feet, B = Face, and C = Windshield.
A AB
BC
CAC
B
In this section, the hardware controls in the CCSM are described in more in detail.
Fig. 2
2. CLIMATE
Windscreen and footwell.
See page 180 for centre display
settings.