Lotus EMIRA V6 - Centre Display; Presets Bar; Cover Flow

180
CLIMATE CONTROL
Centre Display
Additional climate control settings,
as well as those also activated by the
switches can be controlled from the
centre display screen.
Presets Bar
From the side bar of the centre display,
select: Global Settings/App options >
Car > Climate.
A
Recirculation Timer:
Automatic cancellation 30
minutes after activation.
B
Fan Intensity Auto Mode:
Low, medium and high intensity
level options.
C
Auto Rear Defrost:
Heated rear screen automatically
activates below temperatures of
7°C.
D
Auto Start Seat Heating:
Available when in ignition mode
II (active), set the duration period
of automatic seat heating.
See page 127 for information on the
centre display screen.
Climate Settings
Recirculation timer
Fan intensity auto mode
Low
Medium
5 min 15 min 30 min
High
Auto start seat heating
Timer
Auto rear defrost
Recirculation will be turned o after 30 minutes
Starts at temperature below 7° C
Driver Passenger
A
B
C
D
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
Tap the required climate option.
The purpose of this document is to explain further the HMI interaction. The information provided in this document is intended for informational purposes only and is subject to change as version numbers of
this document di er. CEVT may also make improvements and/or changes in the product and the programs described in this information at any time without notice.
COPYRIGHT CEVT [2018] AND/OR LICENSED TO CEVT. ALL RIGHTS RESERVED.
Pg. 95
TABLE OF CONTENT
If the selected item in the list is the rst
or last one, then this is indicated by only
showing two items. ID i.D shows when the
rst item in the list is selected
It is possible to use SWIPE to quickly step
between next/previous item in the list.
Within the cover ow template the user
can navigate left/right with CLICK or SWIPE
horizontally left/right to select next/
previous item in a list. SWIPE right (SR_I)
means that the user goes one step right
and SWIPE left (SL_I) means that the user
go one step left. See chapter 3.2.4.1 PA and
condition - touch event). And then interact
with the selected item using CLICK the
center button.
Cover Flow
Text
Text
80
TITLE
STATUS INFO
INFO
Text
Text
Text
80
Text
TITLE
STATUS INFO
INFO
Navigate through a list of content
3.4.7.9 Cover ow (1/3)
ID i.A ID i.B
80
Primary text
80
Primary text
DCY11_UX_Framework
Use the slide button to activate
the preset.
57
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see “1.5.2 Partial Mode” on page 104 for more details.
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Tap Interaction
Tap and Hold
5 seconds
Fig. 1 Fig. 2 Fig. 3
1.3. GENERAL USER INTERACTIONS
If preset levels are available, tap
on the toggle buttons to select the
level required.
Seat Heating
See page 182 for further information on
using the toggle buttons to change the
seat heating levels.