226
Engine Compartment Panels
Engine cover panel removal is not
necessary when checking the engine
oil and windscreen washer fluid levels,
see pages 227 and 228.
Always turn off the engine before
attempting to remove the engine bay
panels, never attempt to remove the
engine bay panels whilst the engine is
running.
WARNING: Failure to follow this
instruction can result in serious
injury or death.
Panel Removal
Lift the tailgate, see page 54.
1. Using light hand pressure, lift up
the inner sides of the front panel to
release the underside fixings from
the bodysides.
2. Remove the front panel by pulling
it rearwards to release the forward
fixings from the bulkhead panel.
VEHICLE CARE
1
1
1
2
NOTE: To prevent accidental
damage to the panels, place them
in a safe area with the fixings
facing downwards.
Refit the panels in the reverse order of
removal.
Before closing the tailgate, check that
all of the engine compartment panels
have been fitted correctly and are
secure.
Also ensure that there are no
obstructions that would prevent the
tailgate from closing properly and that
no items, such as gloves, tools or rags
To Next Page
Loading...
