MAINTENANCE MANUAL OF ENGINE
109
2. Inspecting engine oil level
Inspection conditions:
◆The machine is stopped at a level ground.
◆The shift lever is at neutral position.
◆The ignition lock is off.
◆The parking brake is pulled tightly.
◆Five minutes after the engine stops.
Inspection steps:
◆Clean surrounding of the oil dipstick.
◆Remove the oil dipstick, and wipe it clean with a
test paper.
◆Install the oil dipstick, and ensure it is installed at
place.
◆Remove the oil dipstick, and inspect whether the
oil level meets the requirements.
Normal conditions:
◆The oil level is not too low.
◆The engine oil is not too thick, thin or rare.
◆No diesel smell exists.
◆The oil is free from obvious metal objects, inclu-
sions, or deterioration.
Abnormal conditions:
◆Replenish oil to the level set forth in the specifi-
cation according to the oil dipstick marking.
◆Change the contaminated oil and oil filter.
◆Consult the engine operation manual for details.
To Next Page
Loading...
Need help?
General
