Do you have a question about the LRP S8 BX and is the answer not in the manual?
List of required equipment for the RTR version.
List of tools necessary for assembly.
Step 1: Assembling the front and rear differentials.
Step 5: Assembling the front gear box.
Step 8: Assembling steering knuckle and suspension arm system.
Step 14: Assembling the front sway bar.
Step 41: Assembling the fuel tank.
Step 47: Assembling the engine onto chassis.
Guide for setting caster angle, roll center, and shocks.
Procedures for tuning, after-run, and general maintenance.
| Scale | 1/8 |
|---|---|
| Type | Buggy |
| Drive Type | 4WD |
| Tire Type | Off-road |
| Suspension | Oil-filled shocks |
| Battery | LiPo (not included) |
Loading...